Macrotel Information
How to Program your Macrotel or Prostar phone
system:
Macrotel programming
Time change, program DTMF tones instead of Pulse, change
ringing options
Self Test: Get into programming mode (#20, 1234 1 #) then dial # 81 (All with the handset
down) You can then press all the buttons and the LEDs will light. Then hit all the # keys
and some LEDs will go out. Lift and replace handset to end self test.
MT-16 and ProStar Single line set
codes: Intercom stations starts at 21. For
an outside line dial 9 or 81 for CO#1, 82 for CO#2 etc.. For external page dial 11
To turn the annoying music on hold
off on an Excel KSU (if you want to call it music) you need to put a jack
in the EXT MUSIC plug on the side of the KSU. Any headphone type jack will do, you can cut
the end off a broken set of walkman headphones or buy a replacement jack at radio shack.
You could also hook up a cheap radio or CD player to play instead. Just hook up a wire
from the speaker or output jack of a radio to the MUSIC plug on the KSU, start off with a
really low volume and see how it sounds when on hold, turn it up SLOWLY until it
sounds good. It will not get very loud and turning it up too loud could
break your music-on-hold feature.
