Executone Information Home Contact Us Business Phone System Help

 

General Info
Phone Systems
Installation Help
FAQs

 

Executone Information

 

Encore quick reference guide

Equity III quick reference user guide

Executone M-phone quick user guide

Isoetec Digital phone instructions

Isoetec analog quick reference guide

 

Executone and Isoetec digital:

Self Test: Depends on KSU try dialing 80 (after picking up handset)
if that doesn't work then dial 7# This lets you test all the buttons. The digital sets will also let you test the handset, speaker and microphone. The volume up and down button toggles between handset mic. to speaker and microphone to handset ear.

Led's flashing like a christmas tree: This means the phone isn't communicating well with the KSU. Old Isoetec analog phones do this sometimes, usually because of a bad connection (wiring or line cord) try unplugging it, wait 10 seconds and plug it in again. If a digital set does this it can be the wiring or the station card, but most likely the phone is broken and needs parts replaced. You can try the 10 ohm resistor trick talked about on the previous page in the 228 station card section. Sometimes it works even with other model station cards.

Encore:

Self Test: N/A

Equity III Handset:
The mouth piece on Executone phones requires the wires to be connected correctly to work. Another words you cannot hook the microphones 2 wires up either way (only one way will work). When they designed the Equity III handsets someone decided to hook  up the two wires backwards then sell a "special" handset cord. You can open up the handset and swap around the black and yellow wires (the Black wire will then be in the "4" position) then the handset will work with regular handset cords you can buy everywhere else. However, now they will no longer work with the original cord. If you have some handsets that are rolled and some that are not it can get confusing when you start swapping cords around.

You can't unplug these phones and plug them in again without waiting at least 5 seconds first. If you do, they won't work and you will have to unplug them again.

You can use Encore 12+ (2512512) and 24+ (2512515) on your Equity III phone system. However you will not have speed dial keys.

Executone on eBay

 

 

Home General Info Phone Systems Installation Help FAQs

Questions or problems regarding this web site should be directed to [phones@securespeed.net].
Copyright © 2004 SFG LLC. All rights reserved.
Last modified: 08/09/05.